Saturday, March 15, 2008

How to set up Eclipse paintball markers for 2008 Mill Rules

In order to comply with the new Millennium rule regarding gun firing modes, Eclipse markers should be configured as follows -

Eclipse Ego 7 / Ego 8 paintball markers

1. Enter the Setup menu;
2. Select (PRESET) (LOAD) and choose the MILLEN option;
3. Select (MAX ROF) and set the value to 11.8*;
4. Select (OFF ROF) and set the value to 11.8*;
5. Select (RAMP SET) (KICK IN) and set the value to 6.0;
6. Select (RAMP SET) (SUSTAIN) and set the value to 6.0;
7. Select (PRESET) (SAVE) and choose the USER 1 option to save these settings for future use.
8. Exit the Setup menu;
9. Check the rate of fire on a league approved ROF meter.

Eclipse Ego 5 / Ego 6 paintball markers

1. Enter the Setup menu;
2. Select (MODE) and choose the RAMP 3** option;
3. Select (ROF CAP) and set the value to 11.8*;
4. Select (OFF ROF) and set the value to 11.8*;
5. Exit the Setup menu;
6. Check the rate of fire on a league approved ROF meter.

Eclipse Etek / Etek 2 paintball markers

1. Enter the Setup menu;
2. Select Firing Mode (red) and set the value to 05.0 (Ramp 3);
3. Select Maximum ROF (green) and set the value to 11.8*;
4. Select Maximum ROF with BBSS Disabled (blue) and set the value to 11.8*;
5. Exit the Setup menu;
6. Check the rate of fire on a league approved ROF meter.

Planet Eclipse no longer provides software updates for the eBlade platform, however the following may prove useful in setting these products up to be compliant

Eclipse E2 / Zero B

1. Fit fresh batteries to the loader that will be used and set the loader speed as required;
2. Enter the Setup menu;
3. Select (MODE) and choose the RAMP 3** option;
4. Set the COFF parameter to 40ms;
5. Enable the breech sensor;
6. Shoot the gun so that it ramps and measure the ROF on a rate of fire meter;
7. Adjust the COFF parameter and repeat 6 until the ROF is 11.8bps* (increasing COFF reduces ROF);
8. Check that CDELAY + CON + COFF is greater than 84ms and if not then increase CON;
9. Exit the Setup menu;
10. Check the rate of fire on a league approved ROF meter.

Eclipse E1 (eBlade)
1. Fit fresh batteries to the loader that will be used and set the loader speed as required;
2. Enter the Setup menu;
3. Set the COFF parameter to 40ms;
4. Enable the breech sensor;
5. Shoot the gun as quickly as you can and measure the ROF on a rate of fire meter;
6. Adjust the COFF parameter and repeat 5 until the ROF is 11.8bps* (increasing COFF reduces ROF);
7. Check that CDELAY + CON + COFF is greater than 84ms and if not then increase CON;
8. Exit the Setup menu;
9. Check the rate of fire on a league approved ROF meter.

*The rate of fire settings on Egos are accurate however not all rate of fire meters will read the same. We recommend that guns be set on the safe side of the legal limit. The difference between 11.8 and 12.0bps is only 1 extra ball every 59 shots!

**If your software does not have the RAMP 3 option then it will be necessary to upgrade your software to the latest version.

I hope that this information helps anyone playing (or training for) events that utilise 2008 Millennium Rules.

How to set up Eclipse paintball markers for 2008 PSP Rules

How to set up Eclipse paintball markers for 2008 PSP Rules

NEW to this new letter... is Nicky T’s Top Tip ! I thought I’d ask Super Tech Nicky T to give us a nice and easy Tech Tip for you guys to keep you Ego’s rockin so here is No.: 1

If you're using a Cure bolt and you want to improve the lifespan of your Ego or Eteks detents, then put a couple of drops of Eclipse oil onto the two Cure bolt orings at the point where the bolt would move past the detents. If you do this each time you play this will reduce the potential wear caused by preventing a rubber on rubber surface contact from occurring.

Sick of feeling miserable because of the stinking COLD weather? Well, worry not! The NEW Eclipse Winter clothing Collection is now in stores around the world. From jackets, light weight hoodies and trackies, to some cool heavy weight hoodies for both girls and boys. Check them out on the Planet Web Site.

Read on for your Tourney set-ups, if you care!!!

Have a great year ballin’ and I hope to see you all around.

Role on the Ego Army !!!

LEDZ

PSP
In order to comply with the new 2008 PSP rule regarding gun firing modes, we recommend that Eclipse markers should be configured as follows -

Eclipse Ego 7 / Ego 8 paintball markers

1. Enter the Setup menu
2. Select (PRESET) (LOAD) and choose the PSP option
3. Select (MAX ROF) and set the value to 13.0*
4. Select (OFF ROF) and set the value to 13.0* or less (recommend 12.0)
5. Select (PRESET) (SAVE) and choose the USER 1 option to save these settings for future use.
6. Exit the Setup menu
7. Check the rate of fire on a league approved ROF meter.

Eclipse Ego 5 / Ego 6 paintball markers

1. Enter the Setup menu
2. Select (MODE) and choose the RAMP 1 or PSP option
3. Select (ROF CAP) and set the value to 13.0*
4. Select (OFF ROF) and set the value to 13.0* or less (recommend 12.0)
5. Exit the Setup menu
6. Check the rate of fire on a league approved ROF meter.

Eclipse Etek / Etek 2 paintball markers

1. Enter the Setup menu
2. Select Firing Mode (red) and set the value to 03.0 (Ramp 1)
3. Select Maximum ROF (green) and set the value to 13.0*
4. Select Maximum ROF with BBSS Disabled (blue) and set the value to 13.0 or less (recommend 12.0)
5. Exit the Setup menu
6. Check the rate of fire on a league approved ROF meter.

Planet Eclipse no longer provides software updates for the eBlade platform, however the following may prove useful in setting these products up to be compliant

Eclipse E2 / Zero B

1. Fit fresh batteries to the loader that will be used and set the loader speed as required
2. Enter the Setup menu
3. Select (MODE) and choose the RAMP 1 or PSP option
4. Set the COFF parameter to 40ms
5. Enable the breech sensor
6. Shoot the gun so that it ramps and measure the ROF on a rate of fire meter
7. Adjust the COFF parameter and repeat 6 until the ROF is 13.0bps* (increasing COFF reduces ROF)
8. Check that CDELAY + CON + COFF is greater than 77ms and if not then increase CON
9. Exit the Setup menu
10. Check the rate of fire on a league approved ROF meter.

Eclipse E1 (eBlade)
1. Fit fresh batteries to the loader that will be used and set the loader speed as required
2. Enter the Setup menu
3. Set the COFF parameter to 40ms
4. Enable the breech sensor
5. Shoot the gun as quickly as you can and measure the ROF on a rate of fire meter
6. Adjust the COFF parameter and repeat 5 until the ROF is 13.0bps* (increasing COFF reduces ROF)
7. Check that CDELAY + CON + COFF is greater than 77ms and if not then increase CON
8. Exit the Setup menu
9. Check the rate of fire on a league approved ROF meter.

*The rate of fire settings on Egos are accurate however not all rate of fire meters will read the same. We recommend that guns be set on the safe side of the legal limit. The difference between 13.0 and 13.33bps is only 1 extra ball every 39 shots!

How to set up Eclipse paintball markers for 2008 Mill Rules

Monday, February 25, 2008

PSP Welcomes Planet Eclipse as a 2008 Sponsor

Planet EclipsePaintball Sports Promotions is pleased to announce the return of Planet Eclipse as a 2008 Sponsor.

“Planet Eclipse is glad to be back supporting the PSP teams and players. Our technical support will be at every event as in previous years, giving you an unmatched level of commitment and service.” - Ian Parsons, President, US Division of Planet Eclipse

Planet Eclipse offers the products you need for your paintball lifestyle. With a full selection of playing gear including jerseys, pants, gloves, and headwear, Planet will get you suited for all your games. Their range of casual wear will keep you looking good around the event and long after.

Planet also has the products to advance your game on the field. Headed by the 08 Ego featuring increased performance and reliability, as well a smaller, sleeker look, Planet’s technology will keep you ahead of the pack.

Visit them on the web at http://www.planeteclipse.com/

For more information about the 2008 PSP Season please visit http://www.pspevents.com/. Stay tuned for frequent updates on the most prestigious league in paintball.